Apco F3 Bi

F3 Bi är en helreflexvinge som tillför det bästa av vad vi har att erbjuda.

44 000,00 SEK


  • Artnr: 60845
  • Ej i lager

Beskrivning av artikel

he F3 Bi is a dedicated full reflex wing, that brings the best of what we have to offer to the tandem experience.

Based on our F3, the F3 Bi is a direct result of customer demand wishing for the same experience with their F3 paramotor wing in a tandem wing.

A solid, stable, easy to use wing that enjoys all the latest technology and the full range of performance that only a full reflex wing can offer.

*Certified up to a whopping 450 [kg], the F3 Bi has tank like construction, backed by APCO’s legendary durability.
Roll stability – One of the development objectives was to retain and improve the proven roll stability of the F3. The result is not only impressive in flight, but also affects the ease of inflation and stabilization of the wing overhead prior to take-off. Just hit the gas and the wing will pop overhead with minimum corrections needed.


Main Features

  • Fully functional accelerator/speed system  (for accommodating trikes)
  • Pat. pending RollerCam® buckles for effortless trimmer control even with the heaviest trikes.
  • Amazing Roll Stability powered by Apco’s Flow Aligned Ribs.
  • Stabilo tip steering handles – easy to reach, light brake load for cruising.
  • Apco’s legendary durability and long lasting materials.
  • Huge speed range with a big chunk of it from the trimmers only.
  • Apco’s FLEXON® battens,  indestructible, no need for special care or folding methods.
  • Butt Holes2 – Passive cleaning of sand and debris from inside the wing.

Designed for both solo and Tandem Trikes, the F3 BI can also be use for foot launch* – the lighter load results in slower take-off speed, with minimum running.
F3 Bi replaces its predecessor Lift EU delivering higher performance, while retaining the same safety and ease of use. Exceptionally easy launch and landing makes this the perfect wing for almost any qualified pilot looking for something more than what the LIFT Series offered.

As with the F1 and F3, incorporated into the F3 Bi is our Flow Aligned Ribs (FAR) feature, morphing direction from center to tip, it aligns the ribs with the natural direction of the flow, increasing both performance and roll stability throughout the speed range. The roll stability of the F3 is especially impressive, allowing for agile, precise handling and perfect soft landings every time.

The canopy incorporates 2 functional “3D cuts” for the best possible leading edge shape definition.
The canopy sail tension has been optimized to be a homogeneous unit, solid and reassuring in flight, resulting in our cleanest wing yet!

*(DGAC certification pending)

F3Bi / Size 36
Code 22336
Cells 58
Area [m2] 36
Area (projected) [m2] 30.46
Span(incl. Stabiliser) [m] 14.7
Span (projected) [m] 11.64
Aspect Ratio 6.0
Aspect Ratio (projected) 4.45
Weight Range (all up) ParaTrike [kg] Up to 450 [kg]
Canopy Weight [kg] 8.3
Root Cord m 2.96
Tip Chord [m] 0.3
Length of Lines on B [m] 8.89
Total Length of Lines [m] 448
Frame hook-up Width [mm] 500 - 650
V-min [km/h] at optimal wing loading 25
V-trim (closed) [km/h] 36 - 40
V-trim (neutral) [km/h] 43 - 47
V-trim (open) [km/h] 50 - 56
V-max [km/h] at optimal wing loading 69
Min Sink [m/s] at optimal wing loading 1.2 m/sec
All Data measured at sea level, using a combination of GPS and Speed Probe, averaged over several runs.

Se även

    Till kassan
    Tillagd i varukorgen